The Triumph 650cc Unit Overhaul Manual
The Bonnie Ref
Parts / Ignition Timing / Tools
Gearbox Index / Technotes
Bonnie At the Castle
| Tool | Description |
| T138 | Valve spring compressor (or equiv.) |
| Z151 2 | Crankcase parting tool |
| Z121 | Crankshaft pinion puller |
| Z89 | Camshaft pinion extractor and installer |
| CD150 | Clutch holder (clutch locking tool) |
| D662/3 | Clutch Hub Extractor 7 |
| D484T | Breaker point cam extractor |
| D496 | Primary chain tensioner |
| CD474 | Engine locking tool Using CD474 (Triumph Service Bulletin #20 1967). |
| P311TR | Universal puller |
| CD422 | Wrist pin drift |
| Special wrench as per SB 65/4 for speedo cable nut if applicable | |
| Impact driver | |
| CD522 | Engine stand |
| CD473 | Layshaft needle bearing drift |
| CD114 | Wrist pin bush tool |
| CD121 | Cylinder head holder |
| Z16 | Valve guide punch |
| ZT23 | Tappet guide block punch |
| CD456 | Ignition timing kit |
| D486T | Camshaft oil seal guide |
| Z89 | Camshaft pinion extractor and installer |
| CD150 | Clutch locking tool |
| D496 | Primary chain tensioner |
| CD474 | Engine locking tool Using CD474 (Triumph Service Bulletin #20 1967). |
| 233 | Electrical circuit tester |
| D571/2T | TDC indicator |
| CD441 | Exhaust pipe adaptor wrench |
| CD422 | Wrist pin drift |
| CD3 | Timing disc |
| CD123 | Timing disc adaptor |
| T138 | Valve spring compressor (or equiv.) |