Interchangeable Parts
4 Apr 2015

NS191
Nipple
Ref# 17  Fig. 28 Page 65 #7 (Qty:1)
 Throttle cable
 (Model: T120R)
Ref# 26  Fig. 28 Page 65 #7 (Qty:3)
 Handlebars
 (Model: T120R)



PCW73A
Washer, spring
Ref# 22  Fig. 12 Page 35 #7 (Qty:2)
 Front/rear frame, bottom rear under bolt 35/23
Ref# 13  Fig. 13 Page 37 #7 (Qty:2)
 Swinging fork, torque stay
Ref# 2   Fig. 14 Page 39 #7 (Qty:4)
 Engine mount stud 39/1, bottom, front



S1-52
Nut
BS 3/8-26TPI Thin (Tool-5/16W)
Ref# 26  Fig. 14 Page 39 #7 (Qty:4)
 Torque stay, head bolts 21/38 (bolts 2,3,4,5)
Ref# 34  Fig. 20 Page 51 #7 (Qty:1)
 Rear brake cam lever
 Torque: 20 LBS



S25-6
Washer, plain
Ref# 17  Fig. 14 Page 39 #7 (Qty:2)
 Driver footrests (both)
Ref# 33  Fig. 20 Page 51 #7 (Qty:1)
 Rear brake cam lever



S79-2
Spoke nipple
Ref# 7   Fig. 19 Page 49 #7 (Qty:40)
 Front wheel
Ref# 6   Fig. 20 Page 51 #7 (Qty:40)
 Rear wheel



WE170  (4 Spares)
Washer, fiber
Ref# 42  Fig.  5 Page 21 #7 (Qty:4)
 Rocker box inspection cap locking spring
 ¹ Use 60-4263
Ref# 4   Fig. 13 Page 37 #7 (Qty:1)
 Swinging fork grease nipple
 ¹ Use 60-4263



1/16x3/8
Pin, split
(1/16 x 3/8 in.)
Ref# 40  Fig. 13 Page 37 #7 (Qty:1)
 Brake operating rod (rear)
Ref# 35  Fig. 19 Page 49 #7 (Qty:2)
 Front brake operating rod (front, both ends)



14-0101  (4 Spares)
Bolt
UNF 1/4-28TPI X 7/16 U.H. (Tool-7/16)
Ref# 4   Fig. 11 Page 33 #7 (Qty:2)
 Primary chain oiler tube
Ref# 14  Fig. 25 Page 59 #7 (Qty:4)
 Seat hinge
 ¹ #7 says 7/16" U.H. elsewhere
But 1/2" here
Ref# 20  Fig. 26 Page 61 #7 (Qty:2)
 Front fender, center stay
Ref# 20  Fig. 26 Page 61 #7 (Qty:2)
 Front fender, front stay
Ref# 20  Fig. 26 Page 61 #7 (Qty:1)
 Rear fender to frame



14-0102  (6 Spares)
Bolt
UNF 1/4-28TPI X 1/2 U.H.
Ref# 22  Fig. 25 Page 59 #7 (Qty:4)
 Seat rail
Ref# 31  Fig. 26 Page 61 #7 (Qty:8)
 ?Fender
Ref# 31  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, bridge
Ref# 31  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, lift handle
Ref# 24  Fig. 35 Page 77 #7 (Qty:2)
 Ignition coil bracket to frame
 (Model: T120R-TR6C)



14-0103  (6 Spares)
Bolt
UNF 1/4-28TPI x 3/4 U.H.
Ref# 24  Fig. 23 Page 55 #7 (Qty:2)
 Battery holder front/rear straps
 ¹ #7 p77/Ref#22 says it's 5/8" U.H.
But here it's 3/4"
Ref# 22  Fig. 35 Page 77 #7 (Qty:4)
 Ignition coil bracket
 (Model: T120R-TR6C)
 ¹ #7 p55/Ref24 says 3/4" U.H.
But here it's 5/8"
Ref# 54  Fig. 35 Page 77 #7 (Qty:6)
 Horn relay bracket



14-0113  (9 Spares)
Bolt
UNF 5/16-24TPI X 9/16 U.H. (Tool-7/16)
Ref# 28  Fig. 13 Page 37 #7 (Qty:1)
 Chainguard, front
 ¹ Install before fender if pos
Ref# 32  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, bracket
Ref# 32  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, rear frame clip



14-0115  (3 Spares)
Bolt
UNF 5/16-24TPI X 7/8 U.H. (Tool-1/2)
Ref# 20  Fig. 15 Page 41 #7 (Qty:4)
 Muffler hanger (to frame), nut 41/21, washer 41/22
 ¹ #7 p61/Ref23 says 5/16" U.H.
But here it's 7/8"
Ref# 23  Fig. 26 Page 61 #7 (Qty:2)
 Front fender front and center stays to bracket (ref 5)
Ref# 23  Fig. 26 Page 61 #7 (Qty:2)
 Front fender rear stay to fork legs



14-0218  (2 Spares)
Bolt
UNF 5/16-24TPI X 1 5/16 U.H.
Ref# 30  Fig. 14 Page 39 #7 (Qty:2)
 Engine torque stays
 ¹ #7 p45/Ref38 says 1 7/16" U.H.
Here it's 1 5/16"
Ref# 38  Fig. 17 Page 45 #7 (Qty:4)
 Lower fork leg spindle
 Torque: 25 LBS
 ¹ #7 p39/Ref30 says 1 5/16 U.H.



14-0219  (2 Spares)
Bolt
UNF 5/16-24TPI X 1 1/2 U.H. (Tool-1/2)
Ref# 29  Fig. 15 Page 41 #7 (Qty:2)
 Exhaust pipe/muffler clamp
Ref# 35  Fig. 15 Page 41 #7 (Qty:2)
 Exhaust crossover pipe (Alternate)



14-0301  (4 Spares)
Nut, plain
UNF 1/4-28TPI (Tool-11mm)
Ref# 15  Fig.  9 Page 29 #7 (Qty:4)
 Gearchange guideplate
Ref# 7   Fig. 15 Page 41 #7 (Qty:4)
 Exhaust crossover pipe clip
Ref# 25  Fig. 35 Page 77 #7 (Qty:6)
 Ignition coil bracket to frame
 (Model: T120R-TR6C)
Ref# 56  Fig. 35 Page 77 #7 (Qty:6)
 Horn relay bracket



14-0302  (2 Spares)
Nut, plain
UNF 5/16-24TPI (Tool-1/2)
Ref# 31  Fig.  9 Page 29 #7 (Qty:1)
 Gearbox outer cover (locknut for clutch cable)
Ref# 34  Fig. 13 Page 37 #7 (Qty:1)
 Chainguard, stepped bolt 37/32
Ref# 12  Fig. 14 Page 39 #7 (Qty:4)
 Engine mount plates, bolt 39/8, top/front, middle both sides
 Orient: Nuts out
Ref# 31  Fig. 14 Page 39 #7 (Qty:2)
 Torque stays
Ref# 21  Fig. 15 Page 41 #7 (Qty:4)
 Muffler hanger (to frame), bolt 41/20, washer 41/22
Ref# 25  Fig. 15 Page 41 #7 (Qty:2)
 Muffler hanger (to muffler bracket), washer 41/24,bolt 41/23
Ref# 27  Fig. 19 Page 49 #7 (Qty:2)
 Front brake cam spindle
 Torque: 20 LBS
Ref# 28  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, rear frame clip
Ref# 19  Fig. 29 Page 67 #7 (Qty:2)
 Passenger footrest hanger



14-0303  (6 Spares)
Nut, plain
UNF 3/8-24TPI (Tool-9/16)
Ref# 21  Fig.  2 Page 15 #7 (Qty:2)
 Engine mount stud 15/19
Ref# 18  Fig. 12 Page 35 #7 (Qty:2)
 Main/rear frame (top)
Ref# 25  Fig. 13 Page 37 #7 (Qty:4)
 Rear shock absorber mount, top/bottom
 Orient: Nuts out or it scrapes brake drum cover
Ref# 22  Fig. 14 Page 39 #7 (Qty:2)
 Engine mount plate, bottom bolts both sides



14-0304
Nut, plain
UNF 7/16-20TPI (Tool-3/8W (or 5/8"?))
Ref# 21  Fig. 12 Page 35 #7 (Qty:2)
 Main/rear frame, bottom front, bolt 35/19
Ref# 14  Fig. 13 Page 37 #7 (Qty:2)
 Torque stay, front (swingarm) and rear (brake plate)



14-0401
Nut, locking
UNF 1/4-28TPI thin locking
Ref# 35  Fig. 14 Page 39 #7 (Qty:1)
 Brake pedal stop
Ref# 31  Fig. 19 Page 49 #7 (Qty:1)
 Front brake, threaded fork end



14-0403
Nut, locking
UNF 3/8-24TPI thin locking (Tool-9/16)
Ref# 18  Fig. 10 Page 31 #7 (Qty:1)
 Clutch adjuster pin
Ref# 27  Fig. 14 Page 39 #7 (Qty:2)
 Engine mount plates, bolts 39/23, top/rear, both sides
 Orient: Head in, nut out



14-0702  (5 Spares)
Nut, locking
UNF 5/16-24TPI thin Philidas (Tool-1/2 deep socket)
Ref# 23  Fig. 11 Page 33 #7 (Qty:3)
 Stator studs
 Torque: 20 LBS
Ref# 31  Fig. 13 Page 37 #7 (Qty:1)
 Chainguard, front mount
Ref# 29  Fig. 26 Page 61 #7 (Qty:2)
 Front fender, bottom stay



14-1201  (10 Spares)
Nut, locking
UNF 1/4-28TPI Cleveloc (Tool-9/16)
Ref# 22  Fig. 26 Page 61 #7 (Qty:2)
 Front fender, center stay to fender
Ref# 22  Fig. 26 Page 61 #7 (Qty:2)
 Front fender, front stay to fender
Ref# 22  Fig. 26 Page 61 #7 (Qty:1)
 Front fender, rear stay to fender
Ref# 22  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, liscense plate bracket
Ref# 22  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, bridge
Ref# 22  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, lifting handle
Ref# 22  Fig. 26 Page 61 #7 (Qty:1)
 Rear fender, frame bracket, top



14-1301  (2 Spares)
Nut, locking
UNF 1/4-28TPI thin Cleveloc
Ref# 52  Fig.  2 Page 15 #7 (Qty:1)
 Protection blade
Ref# 33  Fig. 31 Page 71 #7 (Qty:4)
 Carburetter adaptor 21/12, 21/13 (mount stud)
 (Model: T120R)



14-1302  (6 Spares)
Nut, locking
UNF 5/16-24TPI thin Cleveloc
Ref# 36  Fig. 15 Page 41 #7 (Qty:2)
 Exhaust crossover pipe
Ref# 25  Fig. 22 Page 53 #7 (Qty:2)
 Gas tank, front tank mount



14-6608  (1 Spares)
Screw, Philips
UNC 1/4-20TPI X 1" U.H.
Ref# 8   Fig.  6 Page 23 #7 (Qty:5)
 Timing cover
 ¹ 10/11/1/2/3o'clock from
patent plate are 1 3/8 in. O.A.
Ref# 22  Fig.  7 Page 25 #7 (Qty:1)
 Gearbox inner cover
Ref# 34  Fig.  9 Page 29 #7 (Qty:1)
 Gearbox outer cover
 Orient: Rear-most screw
Ref# 34  Fig. 11 Page 33 #7 (Qty:6)
 Primary chaincase cover



14-6609
Screw, Philips
UNC 1/4-20TPI X 1 5/16" U.H.
Ref# 7   Fig.  6 Page 23 #7 (Qty:3)
 Timing cover
 ¹ 5/7o'clock 1 27/64 in. O.A.
9 o'clock 1 1/8 in. O.A.
Ref# 33  Fig.  9 Page 29 #7 (Qty:2)
 Gearbox outer cover
 Orient: Two forward screws



144921
Screw
Ref# 24  Fig. 36 Page 79 #7 (Qty:2)
 Tail light/stop light lens
 (Model: T120R-TR6R)
Ref# 5   Fig. 36 Page 79 #7 (Qty:1)
 Headlight shell, fixing plate 79/6
 (Model: T120R-TR6R)



21-0544 / S544
Nut, domed
UNF 5/16-24TPI (Tool-1/2")
Ref# 46  Fig.  9 Page 29 #7 (Qty:1)
 Gearbox outer cover
Ref# 36  Fig. 11 Page 33 #7 (Qty:2)
 Primary chaincase cover (stator studs)
 Torque: 10 LBS



21-1822 / S1822
Bolt
UNF 5/16-24TPI X 1/2 U.H.
Ref# 37  Fig. 23 Page 55 #7 (Qty:1)
 Oil tank mount, lower
Ref# 25  Fig. 26 Page 61 #7 (Qty:1)
 Front fender to bottom stay (R#4)
Ref# 25  Fig. 26 Page 61 #7 (Qty:2)
 Front fender, bracket (R#5) to fork legs



37-0135 / W135
Spring, return
Ref# 24  Fig. 19 Page 49 #7 (Qty:2)
 Front brake shoe
Ref# 30  Fig. 20 Page 51 #7 (Qty:2)
 Rear brake shoe



37-0653 / W653
Bearing
20 x 47 x 14 mm (ball journal)
Ref# 10  Fig. 19 Page 49 #7 (Qty:2)
 Front wheel
 ¹ Grease @12,000mi
Ref# 18  Fig. 20 Page 51 #7 (Qty:2)
 Rear wheel
 ¹ Grease@12,000



57-0280 / T280  (1 Spares)
Circlip
Ref# 19  Fig.  8 Page 27 #7 (Qty:1)
 Mainshaft bearing
Ref# 12  Fig. 19 Page 49 #7 (Qty:1)
 Bearing, front wheel
 ¹ Same on mainshaft bearing



57-0989 / T989
Hollow dowel
Ref# 12  Fig.  2 Page 15 #7 (Qty:2)
 Timing cover
Ref# 6   Fig.  6 Page 23 #7 (Qty:1)
 Timing cover
Ref# 2   Fig.  7 Page 25 #7 (Qty:4)
 Gearbox inner cover



57-1076 / T1076  (2 Spares)
Screw
3/8 U.H.
Ref# 43  Fig. 13 Page 37 #7 (Qty:2)
 Chainguard, brakelight switch
Ref# 43  Fig. 13 Page 37 #7 (Qty:1)
 Brakelight switch lever



57-1606 / T1606
Bearing, needle roller
1 1/6 x 7/8 x 3/4"
Closed end needle roller
Ref# 14  Fig.  2 Page 15 #7 (Qty:1)
 Layshaft bearing, outer
 ¹ Easily sourced, removal can be difficult
Ref# 11  Fig.  7 Page 25 #7 (Qty:1)
 Gearbox inner cover
 ¹ Removal can be difficult



57-1738 / T1738  (3 Spares)
Washer, fiber
7/16"
Ref# 45  Fig.  2 Page 15 #7 (Qty:1)
 Primary chaincase drain/adjuster plug
 ¹ See also: Reference 31 Figure 11.
Ref# 31  Fig. 11 Page 33 #7 (Qty:1)
 Primary chaincase drain/adjuster plug



57-2166 / T2166
Cap, inspection
Ref# 47  Fig.  2 Page 15 #7 (Qty:1)
 Primary chain case
Ref# 47  Fig.  2 Page 15 #7 (Qty:1)
 Primary chaincase filler/inspection port
Ref# 47  Fig.  9 Page 29 #7 (Qty:1)
 Gearbox outer cover, filler/inspection port
Ref# 32  Fig. 11 Page 33 #7 (Qty:1)
 Primary chaincase, clutch adjustment



60-0083 / D83
Nipple
Ref# 16  Fig. 28 Page 65 #7 (Qty:1)
 Throttle cable
 (Model: T120R)
Ref# 24  Fig. 28 Page 65 #7 (Qty:1)
 Handlebar, choke cable
 (Model: T120R)



60-0101 / D101  (4 Spares)
Ferrule
Ref# 15  Fig. 28 Page 65 #7 (Qty:8)
 Throttle cable
 (Model: T120R)
Ref# 25  Fig. 28 Page 65 #7 (Qty:6)
 Choke cable
 (Model: T120R)



60-0103 / D103
Ferrule
Ref# 10  Fig. 28 Page 65 #7 (Qty:2)
 Front brake cable
Ref# 2   Fig. 28 Page 65 #7 (Qty:2)
 Clutch cable



60-0506 / D506
Nipple
Ref# 11  Fig. 28 Page 65 #7 (Qty:1)
 Front brake cable, handlebar end
Ref# 3   Fig. 28 Page 65 #7 (Qty:1)
 Clutch cable, handlebar end



60-4245 / S25-1  (9 Spares)
Washer, plain
1/4 x 9/16 x 3/32
Ref# 21  Fig. 26 Page 61 #7 (Qty:2)
 ¹ #7 says 12 req'd, I find just 10
Ref# 21  Fig. 26 Page 61 #7 (Qty:2)
 Front fender, center stay
Ref# 21  Fig. 26 Page 61 #7 (Qty:2)
 Front fender, front stay
Ref# 21  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, liscense plate bracket
Ref# 21  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, bridge
Ref# 21  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, lifting handle



60-4246 / S25-2  (6 Spares)
Washer, plain
3/8 x 3/4 x 1/16
Ref# 20  Fig.  2 Page 15 #7 (Qty:2)
 Engine mount stud 15/19
Ref# 22  Fig. 13 Page 37 #7 (Qty:2)
 Rear shock absorber mount, head of lower bolt 37/21
Ref# 5   Fig. 17 Page 45 #7 (Qty:2)
 Stanchion tube pinch bolt 45/4



60-4247 / S25-3  (18 Spares)
Washer, plain
5/16 x 5/8 x 1/16 (.040)
Ref# 35  Fig.  2 Page 15 #7 (Qty:11)
 Crankcase D.S.
 ¹ Bolts 15/30-31-32 and ??
Ref# 28  Fig.  5 Page 21 #7 (Qty:1)
 Cylinder head bolt (center bolt)
Ref# 30  Fig.  9 Page 29 #7 (Qty:2)
 Domed nuts, gearbox outer cover
Ref# 22  Fig. 11 Page 33 #7 (Qty:3)
 Stator mounting stud
Ref# 33  Fig. 13 Page 37 #7 (Qty:1)
 Chainguard, stepped bolt 37/32
Ref# 10  Fig. 14 Page 39 #7 (Qty:3)
 Engine mount bolt 39/8, D.S. top, front
Ref# 10  Fig. 14 Page 39 #7 (Qty:1)
 Engine mount plate
Ref# 27  Fig. 26 Page 61 #7 (Qty:2)
 Front fender, bottom stay (to lower fork leg)
Ref# 27  Fig. 26 Page 61 #7 (Qty:1)
 Front fender, bottom stay (to fender)



60-4248 / S25-13  (2 Spares)
Washer, plain
1/4 x 7/16 x 1/16
Ref# 37  Fig.  5 Page 21 #7 (Qty:4)
 Rocker box mount bolts
Ref# 30  Fig. 13 Page 37 #7 (Qty:1)
 Rear brake operating rod
Ref# 29  Fig. 23 Page 55 #7 (Qty:4)
 Battery holder straps, front/rear



60-4250 / S26-2  (8 Spares)
Washer, spring
1/4
Ref# 3   Fig. 11 Page 33 #7 (Qty:1)
 Primary chain oiler tube clip
Ref# 38  Fig. 13 Page 37 #7 (Qty:1)
 Chainguard C-clamp
Ref# 13  Fig. 25 Page 59 #7 (Qty:4)
 Seat, hinge
Ref# 23  Fig. 25 Page 59 #7 (Qty:4)
 Seat, rail
Ref# 45  Fig. 35 Page 77 #7 (Qty:1)
 Zener diode bracket
 ¹ Fastens heatsink to bracket
Ref# 55  Fig. 35 Page 77 #7 (Qty:6)
 Horn relay bracket



60-4256 / GS299  (5 Spares)
Washer, serrated
3/16
Ref# 16  Fig.  6 Page 23 #7 (Qty:2)
 Contact breaker cover plate
Ref# 36  Fig. 26 Page 61 #7 (Qty:1)
 ?Stoplight
Ref# 34  Fig. 35 Page 77 #7 (Qty:2)
 Condenser bracket
Ref# 39  Fig. 35 Page 77 #7 (Qty:3)
 Horn mount



60-4259 / S26-1  (3 Spares)
Washer, spring
3/8 x 19/32 x 7/32
Ref# 17  Fig. 12 Page 35 #7 (Qty:2)
 Main/rear frame (top)
Ref# 23  Fig. 13 Page 37 #7 (Qty:2)
 Rear shock absorber mount, lower nut 37/25
Ref# 25  Fig. 14 Page 39 #7 (Qty:1)
 Brake pedal
Ref# 25  Fig. 14 Page 39 #7 (Qty:4)
 Engine mount plate, top/front, T.S.
Ref# 25  Fig. 14 Page 39 #7 (Qty:4)
 Torque stay, head bolts 21/38 (bolts 2,3,4,5)
 ¹ #7 says S26-1 (too small)
Use S26-3



60-4260 / S26-3  (13 Spares)
Washer, spring
5/16
Ref# 11  Fig. 14 Page 39 #7 (Qty:2)
 Engine torque stay, bolt 39/30
Ref# 11  Fig. 14 Page 39 #7 (Qty:4)
 Engine torque stays
Ref# 12  Fig. 15 Page 41 #7 (Qty:2)
 Exhaust pipe bracket/exhaust pipe, screw 41/13
Ref# 17  Fig. 15 Page 41 #7 (Qty:4)
 Muffler hanger bracket, bolt 41/18
Ref# 22  Fig. 15 Page 41 #7 (Qty:4)
 Muffler hanger (to frame), bolt 41/20, nut 41/21
Ref# 24  Fig. 15 Page 41 #7 (Qty:2)
 Muffler hanger (to muffler bracket), bolt 41/23, nut 41/25
Ref# 30  Fig. 15 Page 41 #7 (Qty:2)
 Exhaust pipe to muffler clamp, bolt 41/29
Ref# 37  Fig. 17 Page 45 #7 (Qty:4)
 Lower fork leg spindle cap
Ref# 34  Fig. 26 Page 61 #7 (Qty:2)
 Rear fender, frame bracket
Ref# 49  Fig. 35 Page 77 #7 (Qty:1)
 Zener diode bracket
 ¹ Fastens bracket to middle lug



70-1612 / E1612  (4 Spares)
Washer, serrated
1/4 serrated internal
Ref# 14  Fig.  9 Page 29 #7 (Qty:4)
 Gearchange guideplate
Ref# 10  Fig. 20 Page 51 #7 (Qty:8)
 Rear wheel chain sprocket
 ¹ Also gearchange guideplate 29/14
Ref# 23  Fig. 35 Page 77 #7 (Qty:6)
 Ignition coil bracket
 (Model: T120R-TR6C)



70-2441 / E2441  (2 Spares)
Washer, copper
Copper 1/4" I.D. x 7/16" x 1/32"
Ref# 43  Fig.  2 Page 15 #7 (Qty:1)
 Gearbox drain/level plug 15/42
 ¹ Same as 33/29 for chaincase level plug
Ref# 29  Fig. 11 Page 33 #7 (Qty:1)
 Primary chaincase level plug
 ¹ Same as gearbox level/drain



70-2980 / E2980  (1 Spares)
Stud
BSW/BSF 1/4-xTPI X 15/16 O.A.
(BSW-20TPI, BSF-26)
Ref# 33  Fig.  5 Page 21 #7 (Qty:6)
 Rocker box
Ref# 38  Fig. 26 Page 61 #7 (Qty:1)
 Rear fender, stoplight adapter (to fender)



70-3309 / E3309
O-ring
Ref# 9   Fig.  9 Page 29 #7 (Qty:1)
 Gearchange quadrant
Ref# 27  Fig. 33 Page 73 #7 (Qty:1)
 Tach driven gear housing
 (Model: T120R-TR6R)
 ¹ Also Gearchange quadrant 29/9



70-3446 / E3446
Washer, plain
O.D. 17/32 in. I.D. 5/32 in. Thick ~1/16 in.
Ref# 21  Fig.  7 Page 25 #7 (Qty:1)
 Gearbox inner cover
Ref# 14  Fig. 23 Page 55 #7 (Qty:1)
 Oil pipe junction block



70-3768 / E3768
Washer, D
Ref# 28  Fig. 15 Page 41 #7 (Qty:4)
 Muffler clamp 41/26
Ref# 34  Fig. 15 Page 41 #7 (Qty:4)
 Exhaust crossover pipe



70-5976 / E5976
Chain tensioner abutment
Ref# 6   Fig.  2 Page 15 #7 (Qty:1)
 Primary chaincase
Ref# 10  Fig. 11 Page 33 #7 (Qty:1)
 Primary chaincase



70-7351 / E7351
Washer, sealing
Ref# 19  Fig. 22 Page 53 #7 (Qty:2)
 Gas tank, gas tap
 ¹ Use copper crush washers
with bonded rubber seals
Ref# 33  Fig. 33 Page 73 #7 (Qty:1)
 Tach gear housing
 (Model: T120R-TR6R)
 ¹ Bonded rubber



70-8782 / E8782  (7 Spares)
O-ring
Ref# 48  Fig.  2 Page 15 #7 (Qty:2)
 Primary chaincase filler plug
Ref# 48  Fig.  9 Page 29 #7 (Qty:1)
 Filler plug
Ref# 33  Fig. 11 Page 33 #7 (Qty:1)
 Inspection cap



70-8896 / E8896
Washer, fiber
15/32"
Ref# 26  Fig.  2 Page 15 #7 (Qty:1)
 Tachometer drive plug
Ref# 26  Fig.  2 Page 15 #7 (Qty:1)
 Crankcase, timing hole plug



82-0879 / F879  (1 Spares)
Nut
BS 1/4-26TPI (Tool-3/16W open)
Ref# 34  Fig.  5 Page 21 #7 (Qty:6)
 Rocker box mount stud
 Torque: 5 LBS
Ref# 36  Fig. 13 Page 37 #7 (Qty:1)
 Chainguard, C-clamp
Ref# 30  Fig. 23 Page 55 #7 (Qty:2)
 Oil tank mount, upper
Ref# 39  Fig. 26 Page 61 #7 (Qty:1)
 Rear fender, stud 61/38 stoplight adaptor (to fender)



82-1880 / F1880  (1 Spares)
Washer, copper
5/16"
Ref# 24  Fig.  2 Page 15 #7 (Qty:1)
 Oilway plug 15/23, under crankcase T.S.
Ref# 37  Fig. 11 Page 33 #7 (Qty:2)
 Primary chaincase cover (stator studs)



82-3799 / F3799
Nut
Ref# 37  Fig. 26 Page 61 #7 (Qty:1)
 ?Stoplight
Ref# 35  Fig. 35 Page 77 #7 (Qty:2)
 Condenser bracket
Ref# 38  Fig. 35 Page 77 #7 (Qty:3)
 Horn mount



82-4047 / F4047  (2 Spares)
Washer, cork
Ref# 19  Fig. 17 Page 45 #7 (Qty:2)
 Spring abutment, stanchion tube
 ¹ Also 55/3 oil tank filler cap
Ref# 3   Fig. 23 Page 55 #7 (Qty:1)
 Oil tank filler cap
 ¹ Also 45/19 fork spring abutment



82-4370 / F4370  (6 Spares)
Washer, plain
7/16 x 15/16
Ref# 20  Fig. 12 Page 35 #7 (Qty:2)
 Main/rear frame (bottom front, for nut 35/21)
Ref# 42  Fig. 14 Page 39 #7 (Qty:2)
 Engine mount, bottom, 8 1/16 in. stud 39/4



82-4717 / F4717  (2 Spares)
Nut, locking
BA 2BA
Ref# 44  Fig. 13 Page 37 #7 (Qty:3)
 Brakelight switch
 ¹ #7 p37 says 5, I find only 3
Ref# 44  Fig. 13 Page 37 #7 (Qty:1)
 Brakelight switch lever



82-6310 / F6310
Washer, plain
Ref# 30  Fig. 26 Page 61 #7 (Qty:1)
 Rear fender, frame bracket
Ref# 30  Fig. 26 Page 61 #7 (Qty:2)
 Rear frame, bridge (bolt head)



82-6673 / F6673
Spigot, rubber
Ref# 22  Fig. 23 Page 55 #7 (Qty:4)
 Oil tank mount and battery holder
Ref# 5   Fig. 25 Page 59 #7 (Qty:1)
 Side panel



99-0226 AMAL 11/014
Screw